A Project's Maiden Voyage

The other day was a fine early-spring day.  Yesterday was just like it, only warmer and with less wind.

It seemed like a good day for a maiden voyage.  Yes, I took my winter project out for a ride.  I'd planned to take it for a "shakeout" of, say, 20 kilometers.  Then I'd go home, have lunch and take a ride on one of my Mercians.

But a ride to the World's Fair Promenade and Flushing Meadow park turned into a North Shore jaunt that took up the late morning and early afternoon.  The day was just so nice that I didn't want to go back inside.  Also, I was starting to form a few early impressions about the bike and wanted to spend some more time on the road to examine them, if not in depth.

Also, I wanted to see whether any problems would develop.  So far, I haven't found any.  I'll need to do only the things one normally has to do with a new build (even when using old parts):  Cables and spokes need re-tensioning and I'm going to tweak the saddle and handlebar position a bit.  So far, however, I don't think I'll need to make any major changes.

I reckon I rode 85 or 90 kilometers with a few hills and rough patches.  The bike is both more stable and sprightly than I expected it to be.  It seems, so far, to ride like a less refined version of Vera--which is not a bad thing, necessarily.

Years ago, I had a set of Weinmann 605 brakes on my Romic and one of my Treks.  I liked them then, and now I remember why:  They have a very firm response which, I believe, is enhanced with Mathauser (Kool Stop) brake pads.  I am especially pleased that they are playing nice with the inverse brake levers.

And I remembered what I liked so much about SunTour derailleurs back in the day:  They, like the brakes, have a positive response.  I wondered, however, what the shifting would be like with a modern chain on an old freewheel.  I wasn't so worried about whether they'd mesh:  The freewheel I installed hadn't been used much, if at all:  It was about as close to new as it could be without being new.  It is, though, a five-speed freewheel, which has wider spacing between the cogs than what's found on modern cassettes.  And the chain--a SRAM PC-830--is made for 8-speeds.  

Happily, I didn't miss a shift.  The "pickup" was quicker than I expected, and the chain engaged the cogs--on a SunTour Winner Pro freewheel--without any problems.  The drivetrain shifted and ran quietly.

In an upcoming post, I'll list the componentry. For now, I'll mention two interesting (to you bike geeks, I mean enthusiasts, anyway) things I did.

One is in the rear wheel, which I built.  The hub is spaced for a six-speed rear, with a 126mm over-locknut diameter.  I rearranged the spacing--shortening it by 5mm on the right (drivetrain) side and lengthening the left side by the same amount.  In other words, I spaced the right side for a 5-speed freewheel and, in adding the spacers to the other side, made the hub more nearly symmetrical. This reduces the amount of "dish" in the wheel which, I believe, will make it stronger.

The other thing I want to mention is the handlebar tape.  Yes, I used cloth tape--in this case, Tressostar gray and dark blue--and coated it with clear shellac.

That ornament on the stem?  It was an earring.  It was once half of a pair.  I lost its "mate".  So, I cut off the clamp, filed down the stub and attached it to the stem with Crazy Glue!

If you've been reading this blog, you've seen the bag before.  It's the great Randonneur bag Ely of Ruthworks made, which I've used on Vera for the past couple of years.  I hope she and this bike--which I've yet to name--don't fight for custody of it!

A New Day, A New Wrap

Yesterday I managed to get in a nice ride along the coasts, from my place to the Rockways and Coney Island, along the Verrazano Narrows and up to Hipster Hook back to my place.

The morning was overcast but the afternoon turned bright and clear, if windy.  So I wasn't surprised to see strollers, dog-walkers and, yes, cyclists along the boardwalks and on the promenade under the Verrazano-Narrows Bridge.

Vera, my green Miss Mercian mixte, went for the ride, in part because I wanted to ride a bike with fenders:  There is still a lot of crud and "ponds" in the streets, courtesy of last week's snow and the rain we have had during much of the time since that storm.   If you have seen Vera in previous posts, you might see another reason why I wanted to take her out today:

Yes, I swapped the handlebars from Velo Orange Porteurs (which are on another of my bikes) for Nitto "Noodle bar".  The latter is my first choice for drop bars.  I wanted to try Vera with drops because she had them when I first acquired her.  Although I have liked her ride with the Porteurs, I have always had a feeling that she was designed for drop bars.

Also, I wanted to try some new handlebar tape:

I used two rolls of Newbaum's tape:  one in burnt orange, the other in khaki.  I chose Newbaum's tape for the colors and because I am curious as to how it might be different from other brands of cloth tape I've used.

I wrapped the bars in khaki, leaving gaps wide enough to be over-wrapped with the burnt orange.  Then, I finished the ends with regular jute twine I found in a Dollar Tree store.

  


After wrapping the bars, I gave them four light coats of clear shellac.  Although this wrap doesn't have the "sheen" I've seen on some other shellacked bars, I like the look:  The clear shellac darkened the colors slightly.  Also, even though it has a "harder" feel than un-shellacked (Is that a word?) tape, the tape retained much of its texture, which makes for a nice grip.  I think the "feel" may have to do with the fact that the Newbaum's tape is a bit thicker than other brands (Velox, Tressostar, Cateye) I've used. 

It will take a few rides, I think, to decide whether I like this kind of handlebar wrap.  I used to like regular, un-shellacked cloth, but it seemed that I had to replace it every season.  Then again, I could say the same for Cinelli (or any other brand of) cork wrap. 

The burnt orange, while not an exact match, is surprisingly close to the color of the Ruth Works rando bag on the front.  The bag has, of course, developed a bit of patina.  I imagine that if I keep on riding with this new tape, it will develop a similar "character" and perhaps be even more similar to the color of the bag.