Neither Rain Nor Snow Nor The Gloom Of Night Stops These Bikes

The James Farley Post Office, known to New Yorkers as "The Main Post Office" often has some interesting exhibits--including one that's there now.

It's said to be a postal delivery bicycle from the 1940s. From the looks of it, the date sounds about right.

I couldn't find any markings to identify where, or by what company, it might have been made.  Some features, such as the seat lug and cluster and the rod brakes, mark it as an English bike from that time.  Probably the only American bike builder that made frames with lugged joints was Schwinn, and that was only on its top-of-the-line Paramounts.  Also, the Paramount might have been the only American bike built with cottered cranks, as cotterless cranks were still new, rare and expensive.   And, to my knowledge, no American (and, for that matter few, if any, non-British) bikes had rod brakes.

It would be interesting, to say the least, to know that the bike was made elsewhere, as it was all but unheard-of for the US Government or military in that era to have its supplies made for them overseas.

Here is something else that marks the bike as British or otherwise non-American:

The stand, when kicked back, would snap into the curved piece of metal protruding from the rear fender.  Probably no kickstand would be strong or stable enough to hold up the amount of weight held in the front basket:

Speaking of which:  That basket, combined with the small front wheel, make for some of the strangest proportions I've seen on a bike. But it makes sense, as such a small front wheel is probably the only thing that makes the bike maneuverable with as much weight carried in the position it would have been carried in that basket.

Many of us in the US don't realize that in many countries--including Denmark, the Netherlands, France and New Zealand--significant amounts of mail are still delivered by men and women pedaling two wheels.  The practice seems to have begun in those countries, as well as in the US and UK, during the 1890s.  It declined in the US after World War I, as highways and motorized vehicles became more common, and routes became longer.  However, bicycle deliveries enjoyed a resurgence during the 1930s and World War II, when gasoline and other commodities were rationed.   Then it fell off again during the 1950s and today seems to be limited three American municipalities:  Sun City in Arizona and the Florida communities of St. Petersburg and Miami Beach.

Since the USPS, like other government agencies, has been ordered to "go green", I wonder whether  hope that we will see more mail carriers on bikes.   The three cities I've mentioned have warm year-round weather and are flat; there are other such places in the US.  Also, in traffic-choked urban centers, bicycles can be faster and more efficient than cars.  (It is in such centers that much of Europe's postal bike fleets and personnel are deployed.)  Perhaps we're looking at a new career opportunity for hipsters and their fixies!

With Or Without Cage

Unless you’re a purist who keeps your fixed gear bike NJS-compliant or someone who doesn’t ride much beyond your neighborhood, you use some sort of hydration system. 

Some of you use “Camel Back” type backpacks that hold bladders.  I did when I was doing a lot of mountain biking, although I’ve never really liked carrying anything on my back when I ride. But now I, like most of you, use a bottle-and-cage system.  For all of the diversity of cage materials and designs, most bottles marketed for use on bicycles fit on most cages.  That means you can buy a cage from someone who makes cages, not bottles (like King, who made the stainless steel cages I use) and not have to worry about whether your bottle will fit into it.

Most bikes sold today have threaded  bits on the downtube (and, sometimes, the seat tube) for mounting cages.  But, back in the ‘70’s Bike Boom--around the time I became a dedicated cyclist—most bicycles didn’t have them.  In fact, about the only bikes that came with such provisions were made by constructeurs and other custom builders.  Even top professional-level bikes like the Raleigh Professional and Schwinn Paramount didn’t have bottle mounts.

That meant you needed a pair of clamps—which, in those days, were usually supplied with the cage.  Some would argue that a true “vintage” restoration should include a cage with such clamps—unless, of course, the frame is from a constructeur or other custom builder.  If you look at racing photos from before the early ‘80’s or so, even the top professional riders—including Eddy Mercx on his sunset-orange De Rosa—you can see the clamps.

It was during that time that a few enterprising companies—some of them in the US—came up with some interesting ways of mounting bottles on bikes.

One-clamp cage from Specialites TA, ca. 1975.

Specialites TA of France, which made the cages most racers and high-mileage riders used in those days, made a single-clamp cage.  I mounted one on my Romic and never thought about it:  Like TA’s other cages, it held the bottle securely while allowing easy removal and was all but indestructible.

A Tennessee-based company called Hi-E, which made ultra-lightweight (for the time, anyway) hubs, pedals and other components, came up with their own version of TA’s cage.  Hi-E made their cage from aluminum alloy and it was fixed to the frame with a stainless steel hose clamp.  American Classic would later make a similar cage in Ohio, along with its own lightweight components.

Others found ways of doing away with the cage altogether.  Rhode Gear came up with what was probably the most popular of them.  Their bottle had an extrusion with “tracks” on each side that fit into grooves on the plastic clamp mounted onto the bike.  It was actually quite good—I had one on myPeugeot “fixie”—and became very popular with club cyclists.  Other companies imitated it.

Rhode Gear bottle, ca. 1978

Its advantages were its simplicity and (if you’re a weight weenie) the elimination of 100 grams or so of steel cage and clamps.  Also, it could be mounted on the seat tube of a bike with short chainstays and little clearance between the tire and seat tube.  In fact, I put another Rhode Gear bottle on my Trek racing bike, which had water bottle mounts on the down tube but not the seat tube.

Plus, after a while, they were made in a bunch of colors as well as basic white and black.  The white ones could be had with the logos of a few large bike manufacturers (I had one with a Peugeot emblem) or, for a time, with club logos or other custom designs.

The disadvantage, as you may have figured, is that it was a proprietary design:  You could only use the bottle designed for the system.  At least the bottle was easy to use and sturdy:  I never heard of one cracking or springing a leak, though a few wore out at the tracks, albeit after a lot of hard usage.

Cannondale made a bottles that attached to its “mated” holders with Velcro.  I never tried such a bottle, but a few riders I knew liked them.  The best thing about them, it seemed, was that the bottle could be put into the holder from any angle.  As one fellow club rider said, “When I’m tired, my aim isn’t as good.”  While riding, he could put the Velcro-coated bottle back in its holder without looking at it.

Cannondale bottle and "cage" with Velcro

One other cageless bottle I used had indentations on its sides designed so that the bottle would “snap” in between the seat stays of most bikes. Most bikes at that time had parallel stays of more or less the same diameter placed more or less the same distance apart.  Of course, such a bottle wouldn’t work on many of today’s bikes, including those with monostays.  Also, as you might expect, the bottle was small:  less than half the size of a standard water bottle.  It did come in handy, though, especially on a training ride on a hot day.  

I don’t know what happened to that bottle.  I think I stopped somewhere, drank from it and absentmindedly left it.  When I realized I no longer had it, I couldn’t find another:  Apparently, they were made only for a year or two. 

As water bottle cage fixtures became standard features on mass-produced bikes, the demand for cageless bottles and single-clamp cages fell off.  By the late 1980s, it seemed that no one was making them anymore. 

RDR Bologna bottle

  

 However, a few years ago, RDR Bologna made a water bottle with a slot in the rear that’s designed to slide directly onto the water-bottle braze on.  I haven’t used one, and don’t know anyone who has.  But, from what I can see, it has all of the advantages and disadvantages of the Rhode Gear bottles I used back in the day.

The Wind I Buck, The Wind At My Back -- And Snow

The other night, rain was forecast for most of the area, along with a precipitous (pun intended) temperature drop.  There was even the possiblility of snow flurries for areas north and west.  




Now, the last time I looked, Rockaway Beach was neither north nor west of Central Park (where NYC area forecasts are usually made) or Astoria.  But it looks like the place the Ramones made famous got a bit of the white stuff:

I didn't see any of it on the streets or paths I rode.  But the fact that the snow is there is testament to how cold the weather's been:  The high temperatures haven't passed 5C (40F) in Manhattan or Astoria.  So it's conceivable that they've remained below freezing in the Rockaways.

While the weather's been a bit colder than normal for this time of year, the reason why everyone is talking about it is the wind, which seems to have blown nonstop since the snow/rain fell.  I was glad to be on Arielle rather than Tosca because Arielle has gears.  But it was great to ride her again; of all of my bikes, she fits (and therefore feels) best.

She didn't seem to mind the cold--or wind.  Oddly enough, my trip back from Point Lookout--into the wind--was faster than my ride out there, when the same wind blew at my back.  I guess I was just more motivated to ride in the wind, and Arielle seems not to mind it any more than she minds the cold.  At least the cold air was clear and bright.