Showing posts sorted by date for query Dick Power. Sort by relevance Show all posts
Showing posts sorted by date for query Dick Power. Sort by relevance Show all posts

20 June 2023

Leaving Waterloo

Sheldon Brown dubbed the quarter-century or so following World War II as the "Dark Ages" of US Cycling. Few adults cycled and nearly all of them were clustered around a few cities.  So, perhaps not surprisingly, high-quality cycling gear was difficult to come by, as nearly all American bicycle manufacturing consisted of bikes for kids.  Those tiny number of shops and mail-order companies that offered high-end parts and bikes, as often as not, ordered them for their customers from Europe or a few companies in the US.

As for the bikes:  Some frame builders, like Dick Power of Queens, New York (who, interestingly, sponsored and mentored female riders) and George Olemenchuk of Detroit, turned out some well-crafted machines that rode well. But they made small numbers of frames that rarely, if ever, were ridden by cyclists beyond their immediate environs.  Quite possibly the only nationally-availabe, US-made, world-class (Did I use enough modifying phrases?) bike was Schwinn's aptly-named Paramount. But you couldn't buy one of the showroom floor--unless, of course, your local Schwinn dealer stocked one (and if they did, the probably stocked only one) and it happened to be the right size for you.

1971 Schwinn Paramount
 

Then came the 1970s "Bike Boom."  High-quality racing and touring bikes from England, France, Italy and Japan appeared even in small-town bike shops.  Some might debate that they had ride qualities that the Paramount lacked, but few argued that the workmanship of those imported bikes was better. But they--especially the Japanese bikes--offered much better value for the money, as the Paramount's price doubled within three years.

More to the point, though, the newly-available bikes made Paramounts, as nice as the were, seem stodgy.  And, according to people in the industry, the Paramount's production facilities and methods were dated.  Moreover, by the end of the decade, a number of American custom frame builders like Albert Eisentraut and Bruce Gordon were turning out bikes that rivaled those of their overseas counterparts.

So, in 1980 Paramount production moved to a new facility in Waterloo, Wisconsin.  (Not long after, much of Schwinn's other production shifted from Chicago to Mississippi.) These changes occurred around the same time Schwinn ownership and management shifted to a new generation. But the company failed to keep up with changes in the industry--they were late to the mountain bike and very late to the BMX game--and declared bankruptcy for the first time in 1991.

In the wake of those developments, two members of that new management generation--Richard Schwinn and Marc Muller--took over the Paramount facility and started a company familiar to a generation of American bike enthusiasts:  Waterford.  It focused on building, essentially, updated custom versions of the Paramount:  hand-crafted lugged frames from Reynolds, Tange or other high-quality alloy steel tubing.  Later, they added another line of bikes--Gunnar--with TIG-welded steel frames that weren't available in custom sizes or colors.

A late-model Waterford

Last month, Schwinn and Muller announced that Waterford/Gunnar was closing up shop.  The reason, they said is that they and several other key employees are retiring. They fulfilled their remaining orders and sold the building.  This Saturday, the 24th, there will be a "farewell" ride beginning at the factory, where there will be an "open house."  On that day, an online auction will begin.  Running until 10 July, there won't be many frames or forks available for sale.  But it might be a good source for current or aspiring builders or manufacturers or a collector with "an interest in something from the legendary Waterford factory," according to the company.



18 December 2019

Serious Mojo In The Shadow Of Power

Last week, I spotted a pair of Sun Tour shifters on eBay.  The item's location was listed as "New York, NY."  So I asked whether I could pick them up.

Turns out, the seller was even closer to where I live than I expected:  only about 4 kilometers away.  Woodside, Queens, to be exact.  And he said his "shop" was located behind a restaurant on one of the neighborhood's commercial strips.


The reason I'm not revealing the name of that restaurant, or the name of the shop, is that Damon asked me not to.  In fact, on his website, he says his "shop"--which is really more of a workshop--is in a "secret location" and that he meets customers only by appointment.


Damon is actually an engaging and friendly fellow.  The reason for his arrangement, he says, is that his shop--a garage, really--is a "passion" and he doesn't want to deal with the more mundane parts of the bike business.  (He once had a regular shop, he explained, and running it was nothing like he expected it to be.)  Also, I sensed that he wanted to deal only with customers who shared his passion for vintage bikes.


One of our common loves, as it turns out, is frames from British builders.  He showed me a Claud Butler from the '50's that he's fixing up, along with a few other frames from Claud's countrymen.  When I revealed my own love of Mercians, he knew he'd found a soulmate, at least in bicycle terms.


(Oh, and he did some of his studies for his profession--his "day job"--in Paris and, quelle coincidence, was living in the City of Light at the same time I was there. How do Francophiles become aficionados of British Frames?  Hmm...)


All of the frames in his "shop" were steel, except for one older Vitus bike.  Among his Butlers and early '80's Treks stood one of what might be the most sought-after (by collectors and enthusiasts) bike from a mass manufacturer:  Raleigh Lenton.  It was in really good shape, except for the cellulose fenders--which are almost always broken.  


I could have spent all day at that shop, and with Damon. Because he's trying not to publicize his operation too much, I didn't take photos--except for one particularly intriguing machine.






Damon equipped this Olmo city bike, which probably dates from the '50's or '60's, with Campagnolo Gran Sport equipment, except for the Weinmann centerpull brakes. (The Gran Sport brakes wouldn't have been long enough or played nice with the fenders.)  He was impressed that I've actually written posts about GS equipment and Weinmann brakes, but I was even more taken with some other features of that bike:









Those bars put those narrow "city bars" I see on hipsters' fixies to shame--both for function and style.  But perhaps the best (or at least my favorite) part is something Damon customized.








He bent it to accommodate the front derailleur.  That alone would have made me want to make a return trip to his "shop"--which is just a few blocks away from where Dick Power had his framebuilding shop and retail store.





Before I left, I noticed that he had some vintage Silca pumps that, he explained, had been stored away from sunlight which, apparently, is what makes the plastic on them brittle.  I bought one, in black, for Negrosa, the 1973 full-Campy Mercian I picked up last year.  I know that the Zefal HPX (or even the earlier HP and Competition) pumps are easier to use and sturdier, but most full-Campy bikes of the time had Silca Imperos--and Regina freewheels, which I also have, even though I know the SunTour New Winner and Winner Pro are better in almost every way.  


That trip was short but sweet, to say the least!

19 January 2019

For The Woman Who Had (Almost) Everything In 1951

What I am about to say is not a boast; it's a fact.

I don't know anyone who owns or rides a mixte frame as nice as Vera, my Mercian.  And the only person I know who rides a full-on women's frame (in which the top tube is dropped even further than the twin parallel tubes on the mixte) is Coline, who sometimes comments on this blog.  And I know her women's bike is as good as Vera because a.) it's a Mercian and b.) I used to own it.  I sold it to Coline only because I prefer the style of the mixte. 


Truly high-quality mixte or women's bikes have long been relatively rare.  In France and other countries, stylish and utilitarian bikes that don't have the "diamond" ("men's") configuration are relatively common.  Some are very good, but rarely does one see such a bike with a frame constructed of Reynolds, Columbus or Vitus tubing, or with components that rise above mid-level (though they are, for the most part, at least serviceable).  Certainly, one almost never see mixte or women's bikes that rise to the level of the best diamond-frame racing or touring bikes.


Such bikes have always been even rarer in the US--and they were probably rarer yet in 1951, during what Sheldon Brown has called "the dark ages" of cycling in America.  Who would have made such a machine?





One answer:  Emil Wastyn--or his son, Oscar.  If that name rings a bell, you are: a.) my age or older; b.) know more about the history of cycling in the US than 99.99 percent of the population;  c.) are a Schwinn geek or, d.) are from Chicago.





The bike in the photos isn't a Schwinn, but it could have been.  Oscar Wastyn built it.  His father is the one who convinced Frank Schwinn that his company should build top-of-the-line racing and touring bikes at a time when enthusiasm for six-day races  (which basically kept racing alive in the US during the Great Depression) was waning and the world was on the brink of war.  Those high-end Schwinns, known as the Paramount line, were built by the Wastyns from the marque's inception in 1938 until 1955.



Until the 1960s or thereabouts, the Paramount was the only true high-performance racing or touring bike built in the US, save for the few that were made by a handful of regional builders (mainly for the small-but-active cycling scenes in places like New York, Chicago, Boston and, ironically, Detroit).  Certainly, the Paramount was the only high-quality US-built bike one could buy or order from a local dealer anywhere in the US.  





From what I can see in the photos, the workmanship on the frame is meticulous and in keeping with the style of the times.  I don't know which tubing was used to make it, but I suspect that it was either Accles and Pollock (used on the original Paramounts) or Reynolds, which Wastyn would use when Accles and Pollock stopped making bicycle tubing. 





Also in keeping with the period is the Sturmey Archer three-speed hub.  American cycling at the time was, not surprisingly, influenced by the British, who had yet to embrace the derailleur for their high-speed and long-distance machines.  And, of course, the fenders and chainguard would have been found on any bike, no matter how high its quality, that wasn't a dedicated racer.





As for other parts on the bike, they are typical of the period--save, perhaps, for the front hub and cranks, both of which are "Paramount", the same ones used on Wastyn's bikes bearing that name.  To my knowledge, Paramounts from that period are the only American bikes besides those made by the aforementioned small builders (such as Dick Power and George Omelenchuk) to use three-piece cottered cranks.  Cotterless cranks were still relatively new and expensive, and were still not seen as durable or reliable as their cottered counterparts.  The front hub looks much like Campagnolo and other racing hubs of its time.





I don't know who bought that bike for whom:  Few American adults, and even fewer American adult women, were riding bikes--let alone top-quality ones--in 1951.  Whoever bought it, though, had taste and whoever rode it did so in style.  

13 March 2016

The Racer's Edge: Dick Power

I am told very good tacos are made in this place:




I plan to return one day and find out.  

Recently I learned about something else that was made in this building, next door:





At first glance, it looks like just another storefront building on a block that gentrification hasn't yet found.   Its owners told me that sofas were once made within its walls.  However, they were unaware that something meant for a decidedly un-sedentary pursuit was also made inside its confines:


Dick Power track bike, 1963



About ten kilometers from my apartment is the hipster haven of Williamsburg, Brooklyn, where there seems to be a bike boutique (next to a bar that serves only craft beers, or course!) on every block.  I can recall a time when the area more closely resembled the environs of the taco restaurant and its neighbor:  a place full of blue-collar residents and immigrants, where few, if any, adults ride bicycles. 

 The neighborhood around Santa Fe Taco---Sunnyside, Queens--might well be on its way to becoming like Williamsburg.  Only four kilometers, in another direction, from my apartment, it was long known, along with neighboring Woodside, for the Irish bars and German saloons that served the blue-collar immigrants and first-generation Irish- and German-Americans who lived in the area.   (Both neighborhoods still have large Irish populations but also have perhaps the greatest concentration of Filipinos east of California.)  Sunnyside and Woodside did not suffer the devastation other blue-collar neighborhoods (like Williamsburg) endured, but nevertheless have experienced changes that threaten to erase some of their heritage.

A part of that heritage that is unknown to almost everyone who lives in the neighborhood involves the bikes that were made and sold in that unprepossessing building next to a Taco restaurant.  


Dick Power in front of his shop--in the building next to the taco restaurant!--in 1939.


During the "Dark Ages" of cycling--roughly the two decades or so following World War II--there existed in a few American locales, including New York City, a small but tight-knit community of racers and other adult cyclists.  Shops such as Thomas Avenia's in East Harlem and Kopp's in Princeton catered to them.  And there was a small but dedicated group of framebuilders, some of whom also owned and operated retail shops, who catered to those riders.  

Dick Power was one of them.  From his shop and frameworks at 4710 47th Avenue in Sunnyside, he turned out some beautifully-crafted frames that are prized by riders as well as collectors.  Power, who died in 1973, plied his trade and served as a coach and trainer from the 1930s through the 1960s.  However, the loss of his son--executed for his role in a robbery gone wrong that resulted in the death of a police officer--propelled him onto a mission to recruit and mentor young people into cycling.  





Among those he encouraged, and for whom he built bikes, were several female cyclists.  In the 1950s, the world of cycling, including racing, was even more of a male preserve than it is now.  Power's mentorship of those young women was seen as radical in his time.

I must say, though, that it must have been interesting, to say the least, for a young woman to be coached by a man with a name like "Dick Power".  Than again, those times were more innocent, I imagine!