Product Review: MKS Lambda/Grip King Pedals

Since January, I have been commuting on MKS Lambda pedals.  They are, of course, the pedals that Rivendell sells as its "Grip King" model.


Well, these pedals certainly live up to the moniker Rivendell gave them.  Nearly every comment I've read or heard mentioned their grippiness.  And, while nearly all of the comments were positive, a couple of cycling acquaintances warned me that they could become slippery in wet weather.  Apparently, the "cups" on the pedal collected water and made the pedal slick.


I am happy to report that I didn't experience anything of the sort--even when I got caught in a torrential downpour moments after pedaling away from the Kingsborough campus. It was the heaviest rain in which I've ridden in some time, so I feel confident that a cyclist's feet remain on the Grip King/Lambda pedal even in the worst of conditions. 


My confidence in the grip of these pedals is enhanced by the fact that I have ridden on them in Keen sandals, slingbacks with three-inch heels, LL Bean rain boots, cross-trainers and a few other kinds of shoes. In fact, I feel even more confident about the grip of these pedals than I do about the grip of rubber-block variety found on three-speeds.




About rubber-block pedals:  MKS makes what is probably the only high-quality, rebuildable version of such pedals available today.  They are also one of the last makers of good-quality traditional toe-clippable road pedals.  But, in my experience, MKS doesn't seem to regard people who want such pedals as a "captive" audience.  The company--which still makes all of its pedals in Japan--builds sturdy, well-finished pedals that are reasonably priced and lighter than some cyclists might expect. 


Lambda/Grip King shares the qualities I've just mentioned.  Mine have survived, with hardly a scratch, a couple of close encounters with curbs and a fall I took.  And, even though they are the widest pedals I've ridden in a long time, I am surprised at the amount of cornering clearance they offer.  On the other hand, they don't offer the kind of ground clearance you can get from the company's GR-9 platform pedal, or its White Industries or Lyotard counterparts.  


The Grip King/Lambda pedals also share another characteristic of MKS pedals--at least the loose-bearing models, at any rate.  Chances are, when you turn the axle on your brand-new set, it will feel a bit tight.  You might even feel a slight amount of roughness.  If you're a perfectionist, you can repack the grease or even change the bearings.  But I found that after a few rides, the bearings started to feel smoother.  Now, while not as smooth as sealed-bearing pedals, they are probably as smooth as the best ball-bearing pedals I've ridden.  


As for the bearings:  They are not cartridge bearings, which are what most people think of when they hear "sealed bearings".  However, the steel balls in the Lambda/Grip Kings seem well-protected against the elements.  So, even though I've ridden through some bad weather, and anticipate riding through some more, I anticipate riding these pedals for quite a while before I'll need to overhaul them.


I will admit that, when I start pumping or spinning at the end of a stressful day, I do miss having foot retention on these pedals.  Even though these pedals will hold your feet, you can't "pull" on the upstroke as you can with toe clips and straps or "clip-in" (what the Brits sometimes call "snap-in") pedals.  I tried installing velcro grip straps but they were too wide, and spaced too close together, to fit on the Lambda/Grip Kings.  I ruined the straps when I tried trimming them to  fit.  Maybe I'll try another pair.

Like many of you, I thought the pedals were pretty strange-looking when I first saw them.  However, when you're riding, you don't see your pedals much. Also, because they have a flat profile, they don't stand out as much on many bikes as you might expect.  They blended in surprisingly well on Vera, the bike on which I've been commuting.  That may have something to do with the Velo Orange "hammered" fenders I installed on the bike.


On the whole, I highly recommend the MKS Lambda/Grip King pedals for commuting, errands and shopping, or any other kind of cycling for which you wear ordinary shoes and don't care about speed.  The MSRP seems to be around $55; however, you can get them for around $40, or even less, from Tree Fort Bikes (which have become one of my favorite online bike retailers) and a few other places.

Vera's Changes

After losing her saddle and seatpost last month, Vera's had a few changes.


Don't worry:  I didn't give her a "fade" paint job or outfit her with carbon components.  However, I made a few more subtle alterations to her.

The most obvious, of course, is the Brooks B-67 saddle.  I chose it because of another switch I made, which I'll describe.  The seatpost is a Kalloy that looks like the Laprade post that was ubiquitous during the 1970's and 1980's.  It seems decent enough.  However, the main reason I bought it is that, I discovered, Vera takes a 27.0 seatpost. That was the standard diameter for Mercian and most other English bikes until the late '90's or thereabouts.  Around that time, Mercian and other makers switched to the 27.2 size Arielle, Tosca and Helene--as well as most other current road bikes--use. 

I decided to install the B-67 because, as you may have noticed. i"m riding a more upright bar/stem combination.  The flipped-over North Road-style bars (from Velo Orange) I had looked cute on the bike, but I felt cramped on them.  The bent-over position felt neither as comfortable nor as efficient as riding on the "hooks" or "drops" of my road handlebars.  Plus, I was using it with a Nitto Technomic, which made for one of the flexiest bar/stem combinations I've ridden in a while.  That surprised me, as other Nitto stems I've ridden were stiff, and the Velo Orange Porteur bar I've been riding on Helene seems more than stiff enough.


The new bars are Nitto Jitensha, which offer a good upright position for riding in traffic that still has the somewhat-leaning-forward attitude afforded by the bars that used to come on many French mixte bikes during the '70's and '80's.  


I paired the bars with a Velo Orange "constructeur-style" steel stem.  It's much stiffer than the Technomic it replaced.  And I couldn't resist putting that kittie-with-vase decal on the extension.

Then I changed the fenders because the ones I had--Velo Orange stainless steel--didn't fit very well.  I had a difficult time removing and installing the rear wheel because the rounded shape of the fender made it fit more snugly in the stays than the current fenders.  And, paradoxically, they rattled annoyingly, no matter how much I tightened the fittings.


So, I gave those fenders to a friend who's going to use them on a hybrid with somewhat larger clearances than those of Vera's.  As much as I prefer metal fenders, I broke down and bought a pair of SKS Longboards.  Although they're supposed to be the same width as the VO steel fenders, they fit much better.  And they look better than I expected.


Finally...I all but destroyed the Distortion BMX pedals I had on the bike. The bearings were toast, the axles were bent and the platform was caking.  I got a pair of MKS Lambda (the "Sneaker" or "Grip King" model) for 30 dollars.   I thought they just might work for commuting and errands.  They look strange, but the pedals I had weren't going to win any beauty contests, either.


I'll tell you more about those new parts as I ride them and form, I hope, more meaningful impressions.