Not The Bee's Knees

Since I'm not Eric Rohmer, I'm not going to make this post about Le Genou de Justine. And it may not be the bee's knees, either.  Where did that expression come from, anyway?


Anyway...My knee doesn't look particularly bad:  a couple of cuts and some swelling.  As my doctor said, it feels worse than it actually is.  Still, I don't think you want to look at it.  So, instead, I'll show you what happened to Vera:

Thankfully, the real damage isn't to Vera herself--well, not to the frame, which is to the heart and soul of the bike.  The front wheel is only slightly out of true; the rear is unscathed.  All else seems fine, except for the handlebar.  The right side is bent downward, and there are stretch marks at the point where the main body of the bar meets the center sleeve. It had actually been bent more; I bent it back as much as I could so I could ride the bike home.  But, of course, I'm not going to take any chances with it.  I once broke a handlebar and I was fortunate not to have broken anything else!


I'd been riding the bar--a Nitto Jitensha--for not much more than a month.  It had the nice, solid feel of the Nitto drop bars and stems I ride on Arielle and Tosca.  And they gave me a good position--upright, with a somewhat leaning-forward attitude--for commuting and city riding. They were a bit wider than other city/upright bars I've ridden, which gave me a bit more steering power, but were a bit more difficult to maneuver in tight spots.  That brings me to the one and only complaint I had about the Jitensha:  Given its width, I expected the grip area to be longer. Plus, the hand position it affords is something of a cross between that of a flat bar (which I find is hard on my wrists) and that of the flats or "hooks" of a dropped or "moustache" bar.  I like the drop/moustache position better.  But that, and my liking of a longer grip area, are my personal preferences; if they're not yours, the Jitensha is a nice bar for commuting and other kinds of urban riding.  


I've decided that I'm going to replace it with a bar on which I've ridden more, and like:  the Velo Orange Porteur.  It's the same bar I've been riding on Helene, and I rode it on another bike on which I commuted for a time.  However, I'm not going to use it with inverse levers, as I have on Helene, because they won't work with the brakes that are on Vera.  


Finally, when I install the Porteur bars, I'm going to try a shift lever I found on eBay.  More about that later.  Now all I have to do is heal my knee.   Will Eric Rohmer make a movie about that?

Vera's Changes

After losing her saddle and seatpost last month, Vera's had a few changes.


Don't worry:  I didn't give her a "fade" paint job or outfit her with carbon components.  However, I made a few more subtle alterations to her.

The most obvious, of course, is the Brooks B-67 saddle.  I chose it because of another switch I made, which I'll describe.  The seatpost is a Kalloy that looks like the Laprade post that was ubiquitous during the 1970's and 1980's.  It seems decent enough.  However, the main reason I bought it is that, I discovered, Vera takes a 27.0 seatpost. That was the standard diameter for Mercian and most other English bikes until the late '90's or thereabouts.  Around that time, Mercian and other makers switched to the 27.2 size Arielle, Tosca and Helene--as well as most other current road bikes--use. 

I decided to install the B-67 because, as you may have noticed. i"m riding a more upright bar/stem combination.  The flipped-over North Road-style bars (from Velo Orange) I had looked cute on the bike, but I felt cramped on them.  The bent-over position felt neither as comfortable nor as efficient as riding on the "hooks" or "drops" of my road handlebars.  Plus, I was using it with a Nitto Technomic, which made for one of the flexiest bar/stem combinations I've ridden in a while.  That surprised me, as other Nitto stems I've ridden were stiff, and the Velo Orange Porteur bar I've been riding on Helene seems more than stiff enough.


The new bars are Nitto Jitensha, which offer a good upright position for riding in traffic that still has the somewhat-leaning-forward attitude afforded by the bars that used to come on many French mixte bikes during the '70's and '80's.  


I paired the bars with a Velo Orange "constructeur-style" steel stem.  It's much stiffer than the Technomic it replaced.  And I couldn't resist putting that kittie-with-vase decal on the extension.

Then I changed the fenders because the ones I had--Velo Orange stainless steel--didn't fit very well.  I had a difficult time removing and installing the rear wheel because the rounded shape of the fender made it fit more snugly in the stays than the current fenders.  And, paradoxically, they rattled annoyingly, no matter how much I tightened the fittings.


So, I gave those fenders to a friend who's going to use them on a hybrid with somewhat larger clearances than those of Vera's.  As much as I prefer metal fenders, I broke down and bought a pair of SKS Longboards.  Although they're supposed to be the same width as the VO steel fenders, they fit much better.  And they look better than I expected.


Finally...I all but destroyed the Distortion BMX pedals I had on the bike. The bearings were toast, the axles were bent and the platform was caking.  I got a pair of MKS Lambda (the "Sneaker" or "Grip King" model) for 30 dollars.   I thought they just might work for commuting and errands.  They look strange, but the pedals I had weren't going to win any beauty contests, either.


I'll tell you more about those new parts as I ride them and form, I hope, more meaningful impressions.