In Living Color

Black-anodized components, as I mentioned in yesterday’s post, have waxed and waned in popularity during (and before) the four decades I’ve been a cyclist. I hope I did not convey the impression that all components were black or silver.  At various times during my years on two wheels—and throughout the history of cycling—bike parts have been anodized in a spectrum of colors. 

Today, most of the parts available in a rainbow of hues are intended for fixed gear or single speed bikes.  While cranks, chainrings, pedals, cogs and even chains are available the Roy G. Biv range for bikes designed for the velodrome or urban hipsters.  But cranksets with more than one chainring, derailleurs, brakes and other parts made for road, touring or mountain bikes are usually made in either silver or black, with the latter shade becoming more dominant as carbon-fiber bikes gain popularity.  One of the few notable exceptions to the hegemony (or tyranny, depending on how you look at it) of silver and black in road and off-road bike parts is Velocity rims.

Weinmann Vainqueur 999 brakes.  Red and blue were offered only from 1961 to 1964.

However, in decades past, parts for road, touring and sport bikes have been finished in other colors, red and blue being the most common.  Weinmann and Mafac made their center-pull brakes in those colors for brief periods during the late 1950’s and early 1960’s.  Mafac, in their last years (the early 1980’s), also made their cantilever brakes in a variety of colors.

Modolo Professional brake, circa 1983.  And you thought white components were sooo 2009?

Ofmega Maglia Rosa rear derailleur.  You can't make this stuff up!

The component makers that became most noted for their color palettes were Italian and offered the greatest variety during from the late 1970’s until the mid 1980’s.  Perhaps the most prominent of them were Modolo and Ofmega.  The former finished their “Professional” brakes—found on otherwise all-Campagnolo bikes—in red, blue, green, gold and white, as well as the traditional black or silver.  The latter company finished their derailleurs, which were essentially Campagnolo Records rendered in plastic, in the rosa hue of the Giro d’Italia leader’s jersey as well as the jaune of its Tour de France counterpart, and just about every other color imaginable.

Colnago C60 with 24 karat gold-plated Campagnolo parts

Other companies did not offer such a wide range of tones but nonetheless parted, at least to one degree or another, from the silver/black binary.  I have ridden gold-anodized Mafac 2002 and Galli brakes; Zeus, Sugino and SunTour also made derailleurs, cranksets and other parts with gold anodizing.  Of course, if really wanted bling, you went for the gold-plated (24 karat) parts Campagnolo briefly made before the price of the precious metal skyrocketed around 1980.

Galli rear derailleur in "midnight blue"

In addition to gold, Galli offered one of the most distinctive finishes in the history of bicycle componentry:  “midnight blue”.  It was, of course, darker than most other blue parts but was more complex and richer than navy or black.  In addition to brakes, derailleurs, cranksets, hubs and other traditional “gruppo” parts, Galli offered rims (made for them by FIR) and retrofriction shift levers (manufactured by Simplex) in midnight blue.  Galli were even finishing 3TTT stems, bars and seatposts in their trademark finish.  Such an ensemble looked absolutely fabulous on a white Olmo of that period, but it also looked great on celeste Bianchis and just about any silver bike.

Kooka crank, circa 1992

Probably the last time components made for bikes with more than one gear or to be ridden by anyone besides Keirin racers or hipsters was the early- to mid-1990’s, when it seemed that every twenty-something in California whose father had a lathe in his garage was making parts, mainly for mountain bikes, that were lighter and more expensive than everything else on the market.  Kooka and Topline crankset, which I mentioned in an earlier post, are examples of that genre.  Interestingly, survivors of that time, like Paul Components and White Industries, are now making their (admittedly fine) stuff in silver and black.  Chris King may be the only exception:  His headsets, hubs and other parts are finished in even more colors than they were two decades ago.

These days, all of my bike components are black or silver.  Part of the reason is that most of the stuff I use is available only in those colors.  But another is that I don’t want parts that detract from the kinds of finishes I like on my frames.

Paint...I Mean, Anodize...It Black

To many bicycle enthusiasts, “classic” components come in a spectrum of colors ranging from silver mist to gleaming chrome.  Some purists—or pedants who fancy themselves as such—believe that all components worth using are polished, preferably to a mirror finish.  Cranksets like the Stronglight 93, 63 and 49, Specialites TA Pro Vis (a.k.a. Cyclotouriste) or Nervar Star are among the preferred components of those with such aesthetic preferences.  So do Maxicar hubs, Huret Jubilee derailleurs and old-style 3TTT bars and stems.  

Stronglight 93 crankset in its natural habitat:  on a Peugeot PX-10.

 They’re all lovely pieces and perfectly valid on modern as well as classic bikes.  And, oh, yes, Campagnolo Gran Sport and Record stuff made until 1985 or so.  They had a more buffed finish but took on a nice sheen that looked great on just about any bike, especially a silver Cinelli.

Huret Jubilee in its natural habitat:  a Rene Herse

 

But not all components made before the lava field of carbon fiber oozed across, and blanketed, the cycling landscape looked like they were chromed or polished so that you could use them for shaving or putting on your makeup.  A couple of years before I started taking rides of more than a few miles—a year or two after the ‘70’s Bike Boom ended—a cult of sorts developed around black anodized parts.  

Original Campagnolo Super Record rear derailleur, circa 1974

It seems to have started when, in the middle of the decade, Campagnolo introduced its Super Record line.  It was identical to the Record line (which included the Nuovo Record rear derailleur) but included titanium bolts and bottom bracket and pedal axles.  And, to distinguish it visually from the Record line, the knuckles of the rear derailleur were anodized black.  So were the pedal cages and chainrings.  

(The hubs and brakes were the same as those in the Record line.  The brake levers had drilled-out handles and, ironically, weighed two grams (!) more than the non-drilled levers.  Apparently, the handles were made of thicker metal to compensate for the drilling.)

Sugino Mighty crankset, circa 1975

Maillard 700 pedals.  Don't you just love rhe red dust caps?

Once Campagnolo introduced its Super Record components, other companies got onto the black-anodized bandwagon.  Stronglight, Shimano, Sugino and other chainrings were available in noir versions.  Lyotard, Maillard, Mikashima (MKS) and Kyokuto (KKT)—the leading pedal makers, along with Campagnolo, at that time—offered black-caged and all-black versions of their products.  And, once 3TTT and Cinelli started selling black handlebars and stems, Phillipe and Pivo of France as well as Nitto and Sakae Ringyo of Japan followed suit.

SunTour Cyclone rear derailleur, circa 1975

SunTour and Shimano, naturally, offered several models of their derailleurs with black knuckles, like Campagnolo, or all-black versions.  I think the SunTour Cyclone silver rear derailleur with black accents is the prettiest shifting mechanism, besides the Huret Jubilee, ever made.  

Shimano Dura Ace hub, circa 1976

And Shimano went as far as to offer all-black versions of its Dura Ace components.  I think their hubs, with bright silver oil hole covers and axle nuts, looked particularly nice.  Their silver crankset with black rings was also nice.

Original Jim Blackburn rack on a Dawes Galaxy:  verrry '70's!

When those black components—and Jim Blackburn racks and water bottle cages—found their way to the market, I—like most novitiate cyclists of the time—had never seen anything like them before.  But a very few longtime riders—like Fred DeLong, the long-serving technical editor of Bicycling! Magazine—had seen an earlier fad for black anodized components in the years before World War II.  DeLong mentioned it in one of his columns.  And he—or some other bicycle writer of the time—mentioned a still-earlier time, around the turn from the 19^th to the 20^th Century, when black parts were all the rage.

The mid-70s mini-craze for black parts lasted a few years.  Then, most component makers quietly dropped them.  About a decade later, black chainrings and, later, other parts, started to appear on mountain bikes.  Road bikes reverted to the polished- (or buffed-) silver look in parts.  That wasn’t all bad, especially if said components were from SunTour’s Superbe Pro line.

SunTour Superbe Pro track hub

That aesthetic—and SunTour itself—disappeared around the time carbon-fiber bikes and parts reached the mass market.   The past few years, though, have seen something of a resurgence of shiny silver stuff as cyclists (mainly non-racers) are discovering (or re-discovering) the versatility, durability, beauty and ride quality of classic steel frames, or modern frames inspired by them.