23 July 2016

A Paris Bike Tour To The Grand Train

Sometimes I am a creature of habit.  Yesterday I went to Paris Bike Tour, from whom I rented a bike when I was here last year.  I did the same this time, except that I  got one of their "official" bikes (with the PBT logo and colors) this time.  Last year's bike was a silver Arcade, which was similar, if not the same, except for one thing:  the bike I got this year has a Shimano Dynohub powering the front and rear light, which I used last night.  Last year's bike had battery lights.




At first, I thought this year's bike was slower--or that I've aged more than a year or gained more weight than I thought I did since last year. (Don't ask!  Never ask a woman questions about her weight! ;-)) Then I thought that the seat was slowing me down--after all, it's the cushy sort found on bikes like this, and I'm used to my Brooks saddles.  But, finally, after steering out of the rond (or roundabout, as the Brits call them) of the Place de la Bastille, I realized why everything felt so sluggish:  The tires had about half as much air in them as they needed.  

I could have topped off the tires at any number of places, namely bike shops and gas stations.  As it happened, PBT is closer to Bastille to any other such place (that I know about, anyway), so I went to them.  Just for good measure, they did a quick check of the rest of the bike, and found nothing amiss.

All was well with the world, and off I went on the bike.  Mostly, I've rambled:  I've had no particular destinations in mind.  Actually, I headed for the hills, such as they exist.  Of course, I rode up the longest and steepest hill in Paris:  the one leading to the Sacre Coeur de Montmartre--and, of course, down to the teeming streets and open-air markets of Goutte d'Or, often called the "petite Afrique" (little Africa) of Paris.

When I pedaled in that neighborhood--and neighboring Barbes-Rochechouart-- this year and last, I noticed that however well-intentioned the bike lanes are, it is all but impossible to stay on them unless you want to stop-and-start, or do a lot of dodging and weaving.  It seems that, even by Paris standards, the streets and sidewalks of that neighborhood are narrow, and people are always out shopping or otherwise out and about, always in large groups. So, they almost can't help but to spill into the bike lanes.  They almost invariably get out of your way, at least to the degree they can, and say "pardon".  I saw only one cyclist argue with the pedestrians.  That cyclist himself is African, from Senegal.  "Vous n'etes pas francaise"--"You are not French" he said with a knowing grin.  I nodded, sheepishly.  "Pas problem.  Vous etes sympathique."  I almost expected him to say I am "tel" or "trop" sympathique--so or too nice--buy he just left it at "nice".  




Anyway, from there, I rode to Saint Denis--home of the Stade de France, site of the Euro soccer championship and one of the terror attacks in November--only to find the Basilica closed.  Still, it's impressive from the outside:





If it looks unbalanced, that's because the North Tower (the one that would have been on the left) was removed in 1840 after it was damaged by lightning three years earlier and subsequent storms.  Work on reassembling and installing is now in progress.  




But the ride to St. Denis was not for naught, as I found a path along the canal to La Villette, a few kilometers away in the northern part of Paris, where it connects with Canal de l'Ourcq, which in turn connects  with the Canal St. Martin-- an extremely popular spot for cycling, walking and picnics.

Then, after some more wandering I decided to hop a train:




No, I didn't go back to New York.  Rather, I chanced upon something I'd heard about before coming to Paris.






The Grand Train is held, as you might expect, in an old rail terminal and storage yard.  It was nice to look at tains that had, not only power, but also style.

You really had the sense that people rode those trains.


  

In those days, all Frenchmen wore moustaches.  At least, in the movies--and on trains--they did:





The engine in the photo below was designed for use in rugged Pyrenees terrain no other vehicles could reach.  It was used as a "relay" to and from ambulances and other cars and trucks, as well as to get pilgrims to Lourdes. 




It made its first run more than two decades after the first Tour de France cyclists climbed those peaks in the Pyrennes, and its last about two decades before I pedaled up them.

The organizers of Grand Train seem to have "discovered" some interesting uses for old track beds--like a "beach"





a "garden" 




and even a chicken coop.





(It looks like someone thought formal wear was required for this event!)

Hey, they even figured out that a gravelled track bed makes great petanque  court.





I was not surprised:  My Italian grandfather used to play bocce on a disused rail bed underneath an almost-equally disused viaduct of the New York transit system.

What would he think of that young lady?


22 July 2016

The Good News, And More (I Hope)

In a literal way, this sign can tell you where I'm not right now:


See original image
Add caption

During one trip to California, I got about as close as one is allowed to the sign.  I'm not anywhere near it now.  However, this sign inspired a sign I saw where I am now:






In a way, I can understand why that "Bonne Nouvelle" sign is done in a similar style to the "Hollywood" sign.  The latter reflects, I think, the exuberant optimism in which the film industry was created. And the neighborhood in which the "Bonne Nouvelle" signs are posted also has a long association with the performing arts.

However, the area around the "Bonne Nouvelle" sign bore  its namesake centuries before the station bearing the sign was built.  

The Bonne Nouvelle district--and the station--are named for the Notre Dame de Bonne Nouvelle.  That good news is,  I am very sure, different from that for a Hollywood producer.

Of course, you surmised that I am in a French-speaking locale.  I am indeed in Paris, again, visiting a couple of friends.  The station is one at which I transferred--on my way to pick up a bike, though not either of the ones I mentioned in yesterday's post!

21 July 2016

Something Else That Isn't New, And Something That's Even Better

So...You think Shimano introduced the low-profile cantilever brake as part of its then-new XTR mountain bike group of components in 1992.

Well, when I first saw those XTR low-profile brakes, I had my suspicions.  Like most Shimano "innovations", some other company had tried it before.  Some, like the dual-pivot brakes by GB, Altenberger and Weinmann, didn't work very well, and Shimano was the first component manufacturer to make it work.  Others, like indexed derailleur shifting and hubs with integrated cassette bodies, were successful in earlier iterations (in both cases, from SunTour), but the cycling public wasn't--for various reasons--ready for them.

So...It probably wouldn't surprise you to learn that Shimano didn't invent the low-profile cantilever brake after all:



I don't know when this brake was made.  I'm guessing that they came as original equipment on the bike and, from what else I saw on the bike--a Motobecane city or utility bike--it was made in the 1960s, or even earlier.  Perhaps the brakes were made by one of the familiar but now-extinct manufacturers like Mafac, CLB or Weinmann.  Or they might have been made by some other company that went out of business even earlier than those firms.  



A sign announcing the bike was for sale hung from its top tubes.  The price was pretty low.  I thought about buying it, except that I don't have the time or resources to restore it.  Its owner might have ridden it for years without lubing (let alone replacing) the chain or cables, or cleaning and greasing the bearings.  But, as you know from reading this, that's something I would never do if I could help it.

Also, the logistics of getting the bike to my place would have been difficult, to say the least, for reasons I will reveal in a future post (possibly tomorrow).

In the meantime, I'll leave you with another interesting bike I saw today.  Given the way it was parked, I couldn't take better photos.  



You know that at some point, this bike was owned by someone who rode a lot--and not just from the French Cycle Touring Society sticker on the fender.



I'm guessing that the bike originally had dropped handlebars and, possibly, a Brooks or Ideale leather saddle.  Should we be upset that the bike now has flat bars and a thicker saddle?  Although I would have liked to see the bike in its "original" state, if the bars and seat are the thing that makes the bike a rider rather than a wall hanging, I won't complain.

The frame is made of Vitus 888--in its time, the chief European rival to Reynolds 531 and Columbus SL or SP. Also, the components are among the best of their time:




Now, you know the Specialities TA crankset, Huret Duopar derailleurs and Maxicar hubs spell "top of the line touring bike."  But this bike's owner (or builder) knew a thing or two:  the front sported a Mafac Racer brake, but the rear featured a Mafac Raid.  (Can't you just see and hear the bated breath and Velo Orange and Compass Cycles?)  And those pedals, from Specialites TA:  possibly the finest quill pedals ever made.  

My favorite feature, though, is this:



No, it's not a funky shifter for a front derailleur.  Instead, the lever operates this:



Some cyclists believed that when Sanyo chainstay-mounted dynamos were made (in the 1980s), they were the best available. I never used one myself, but I knew a few cyclists who did.  All claimed the generator was more efficient than any other available at the time--as long as the tire wasn't knobby or slicked by snow, ice, mud or oily rainwater.

Whatever you want to say, Meral bicycles reflected a lot of attention to detail.  It's too bad we didn't see more of them in the US.

(Yes, that last sentence is a clue as to why I decided not to buy the Motobecane with the low-profile cantilever brakes!)